View DG9051-11_8626888.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vishay siliconix dg9051, dg9052, dg9053 document number: 73410 s11-1066-rev. b, 30-may-11 www.vishay.com 1 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 precision 8-ch/dual 4-ch/triple 2-ch low voltage analog switches/multiplexers description the dg9051, dg9052, dg9053 are low-voltage monolithic cmos analog switches and multiplexers. dg9051 is an 8-channel multiplexer; dg9052 is a dual 4 channel multiplexer; and dg9053 is a triple single-pole/double throw (spdt) switch. they are designed to operate from a + 2.7 v to + 12 v single supply or 2.7 v to 6 v dual power supplies. all control logic inputs have guaranteed 2 v logic high/0.8 v logic low when operating from a single 5 v or dual 5 v supplies, and 2.4 v logic high/0.8 v logic low when v + = 12 v. built on vishay siliconix?s proprietary high-density process, the dg9051, dg9052, dg9053 offer the advantage of bi-directional signal, rail to rail analog signal handling. as a committed partner to the community and the environment, vishay siliconix manufactures this product with the lead (pb)-free device terminations. for analog switching products manufactured with 100 % matte tin device termination, the lead (pb)-free ?-e3?suffix is being used as a de-signator. features ? halogen-free according to iec 61249-2-21 definition ? 2.7 v to 12 v single supply or 2.7 v to 6 v dual aupply operation ? guaranteed r on matching ? low voltage cmos logic compatible ? compliant to rohs directive 2002/95/ec benefits ? wide operation voltage range ? pin compatible with 74hc4051/2/5 ? guaranteed low leakage applications ? battery powered equipment ? test process equipment ? communication systems ? a/v and mixed signal routing ? automotive functional block diagram and pin configuration the information shown here is a preliminary product proposal, not a commercial product data shee t. siliconix is not committed t o produce this or any similiar product. this information should not be used for design purposes, nor construed as an offer to furnish or sell suc h products. enable y1 a gnd v ee v cc c b y0 y z1 x z x1 z0 x0 1 2 3 4 5 6 89 7 16 15 14 13 12 11 10 dg9053 enable y0 x3 gnd v ee v cc b a y2 x2 y x1 y3 x y1 x0 1 2 3 4 5 6 89 7 16 15 14 13 12 11 10 dg9052 logic enable x4 a gnd v ee v cc c b x6 x2 x x1 x7 x0 x5 x3 1 2 3 4 5 6 8 7 16 15 14 13 12 11 9 10 dg9051 logic ordering information temp. range package part number - 40 c to 85c tssop-16 dg9051dq-t1-e3 dg9052dq-t1-e3 dg9053dq-t1-e3
www.vishay.com 2 document number: 73410 s11-1066-rev. b, 30-may-11 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 x = don?t care truth table enable input select inputs on switches c* b a dg9051 dg9052 dg9053 h x x x all switches open all switches open all switches open l l l l x - x0 x - x0, y - y0 x - x0, y - y0, z - z0 l l l h x - x1 x - x1, y - y1 x - x1, y - y0, z - z0 l l h l x - x2 x - x2, y - y2 x - x0, y - y1, z - z0 l l h h x - x3 x - x3, y - y3 x - x1, y - y1, z - z0 l h l l x - x4 x - x0, y - y0 x - x0, y - y0, z - z1 l h l h x - x5 x - x1, y - y1 x - x1, y - y0, z - z1 l h h l x - x6 x - x2, y - y2 x - x0, y - y1, z - z1 l h h h x - x7 x - x3, y - y3 x - x1, y - y1, z - z1 absolute maximum ratings (t a = 25 c, unless otherwise noted) parameter limit unit voltage referenced to v- v + 13.5 v gnd 7 digital inputs a v s , v d (v -) - 0.3 to (v +) + 0.3 current (any terminal except s or d) 30 ma continuous current, s or d 100 peak current, s or d (pulsed at 1 ms, 10 % duty cycle max.) 200 package solder reflow conditions b ir/convection 260 c storage temperature - 65 to 150 power dissipation (packages) c t a = 70 c, tssop-16 d 925 mw
document number: 73410 s11-1066-rev. b, 30-may-11 www.vishay.com 3 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 specifications (single supply 12 v) parameter symbol test condition unless otherwise specified v + = 12 v, 10 %, v - = 0 v v a , v en = 0.8 v or 2.4 v f temp. b limits - 40 c to 85c unit min. c typ. d max. c analog switch analog signal range e v analog full 0 12 v on-resistance r on v d = 3.5 v, i s = 1 ma sequence each switch on room full 30 40 50 ? r on match between channels g ? r on v d = 3.5 v, i s = 1 ma room 5 switch off leakage current i s(off) v en = 2.4 v, v d = 11 v or 1 v, v s = 1 v or 11 v room full - 1 - 20 1 20 na i d(off) room full - 1 - 20 1 20 channel on leakage current i d(on) v en = 0 v, v s = v d = 1 v or 11 v room full - 2 - 10 2 10 digital control logic high input voltage v inh full 2.4 v logic low input voltage v inl full 0.8 input current i in v ax = v en = 2.4 v or 0.8 v full - 1 1 a dynamic characteristics transition time t trans v no /v nc = 8 v/0 v, 0 v/8 v r l = 300 ? , c l = 35 pf room full 26 35 55 ns break-before-make time t bbm v x,y, z = 5 v, v s = 0 v, r l = 306 ? , c l = 35 pf room full 310 enable turn-on time t on(en ) room full 20 35 45 enable turn-off time t off(en ) room full 16 30 40 charge injection e q c l = 1 nf, v gen = 0 v, r gen = 0 ? room 38 pc off-isolation e,h oirr f = 1 mhz, r l = 50 ? room - 78 db crosstalk e x ta l k room - 83 source off capacitance e c s(off) f = 1 mhz, v s = 0 v, v en = 2.4 v room 4 pf drain off capacitance e c d(off) f = 1 mhz, v d = 0 v, v en = 2.4 v room 8 drain on capacitance e c d(on) f = 1 mhz, v d = 0 v, v en = 0 v room 15 power supply power supply current i+ v en = v a = 0 v or v+ room 1 a
www.vishay.com 4 document number: 73410 s11-1066-rev. b, 30-may-11 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 specifications (dual supply v + = 5 v, v - = - 5 v) parameter symbol test condition unless otherwise specified v + = 5 v, v - = - 5 v 10 % v a , v en = 0.8 v or 2 v f temp. b limits - 40 c to 85c unit min. c typ. d max. c analog switch analog signal range e v analog full - 5 5 v on-resistance r on v + = 4.5 v, v - = - 4.5 v, v d = 3 v, i s = 1 ma sequence each switch on room full 35 55 60 ? r on match between channels g ? r on v + = 4.5 v, v - = - 4.5 v, v d = 3 v, i s = 1 ma room 5 on-resistance flatness i r on flatness room 7 10 switch off leakage current a i s(off) v + = 5.5 v, v - = - 5.5 v v en = 2 v, v d = 4 .5 v, v s = 4.5 v room full - 1 - 20 1 20 na i d(off) room full - 1 - 20 1 20 channel on leakage current a i d(on) v + = 5.5 v, v - = - 5.5 v v en = 0 v, v d = 4.5 v, v s = 4.5 v room full - 2 - 10 2 10 digital control logic high input voltage v inh full 2 v logic low input voltage v inl full 0.8 input current a i in v ax = v en = 2 v or 0.8 v full - 1 1 a dynamic characteristics transition time e t trans v + = 4.5 v, v - = - 4.5 v v no/nc = 3 v, r l = 300 ? , c l = 35 pf room full 35 50 65 ns break-before-make time e t bbm v x,y, z = +/- 3 v, v s = 0 v, r l = 300 ? , c l = 35 pf room full 512 enable turn-on time e t on(en ) room full 38 55 70 enable turn-off time e t off(en ) room full 22 35 50 source off capacitance e c s(off) f = 1 mhz, v s = 0 v, v en = 2 v room 5 pf drain off capacitance e c d(off) f = 1 mhz, v d = 0 v, v en = 2 v room 9 drain on capacitance e c d(on) f = 1 mhz, v d = 0 v, v en = 0 v room 13 power supply power supply current i+ v en = v a = 0 v or v + room 1 a i- room - 1
document number: 73410 s11-1066-rev. b, 30-may-11 www.vishay.com 5 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 specifications (single supply 5 v) parameter symbol test condition unless otherwise specified v + = 5 v, 10 %, v - = 0 v v a , v en = 0.8 v or 2 v f temp. b limits - 40 c to 85c unit min. c typ. d max. c analog switch analog signal range e v analog full 0 5 v on-resistance r on v + = 4.5 v, v d or v s = 3 v or 3.5 v, i s = 1 ma room full 80 100 120 ? r on match between channels g ? r on v + = 4.5 v, v d = 3 v, i s = 1 ma room 8 switch off leakage current a i s(off) v + = 5.5 v, v en = 2 v v s = 1 v or 4.5 v, v d = 4.5 v or 1 v room full - 1 - 20 1 20 na i d(off) room full - 1 - 20 1 20 channel on leakage current a i d(on) v + = 5.5 v, v en = 0 v v d = v s = 1 v or 4.5 v room full - 2 - 10 2 10 digital control logic high input voltage v inh full 2 v logic low input voltage v inl full 0.8 input current a i in v ax = v en = 2 v or 0.8 v full - 1 1 a dynamic characteristics transition time t trans v + = 4.5 v, v - = 0 v, v no / nc = 3 v / 0 v, 0 v / 3 v, r l = 300 ? , c l = 35 pf room 40 ns break-before-make time t bbm v + = 4.5 v, v x,y, z = 3 v, v s = 0 v, r l = 300 ? , c l = 35 pf room 15 enable turn-on time t on(en ) room 40 enable turn-off time t off(en ) room 20 charge injection e q c l = 1 nf, v gen = 0 v, r gen = 0 ? room 20 pc off-isolation e,h oirr f = 1 mhz, r l = 50 ? room - 79 db crosstalk e x ta l k room - 83 source off capacitance e c s(off) f = 1 mhz, v s = 0 v, v en = 0 v room 4 pf drain off capacitance e c d(off) f = 1 mhz, v d = 0 v, v en = 2 v room 8 drain on capacitance e c d(on) f = 1 mhz, v d = 0 v, v en = 0 v room 15 power supply power supply current i+ v en = v a = 0 v or v + room 1 a
www.vishay.com 6 document number: 73410 s11-1066-rev. b, 30-may-11 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes: a. leakage parameters are guaranteed by worst case test condition and not subject to production test. b. room = 25c, full = as determin ed by the operating temperature suffix. c. the algebraic convention whereby the most negative value is a minimum and the most po sitive a maximum, is used in this data sheet. d. typical values are for design aid only, not guaranteed nor subject to production testing. e. guaranteed by design, not subject to production test. f. v in = input voltage to perform proper function. g. ? r don = r don max - r don min. h. worst case isolation occurs on c hannel 4 due to proximity to the drain pin. i. r don flatness is measured as the differenc e between the minimum and maximum measured values across a defined analog signal. stresses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other condit ions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. specifications (single supply 3 v) parameter symbol test condition unless otherwise specified v + = 3 v, 10 %, v - = 0 v v en = 0.4 v or 2 v temp. b limits - 40 c to 85c unit min. c typ. d max. c analog switch analog signal range e v analog full 0 3 v on-resistance r on v + = 2.7 v, v d = 1.5 v, i s = 0.1 ma room 130 ? r on match between channels g ? r on v + = 2.7 v, v d = 1.5 v, i s = 0.1 ma room 12 switch off leakage current a i s(off) v + = 3.3 v, v en = 2 v v s = 3 or 0.3 v, v d = 0.3 or 3 v room full - 1 - 20 1 20 na i d(off) room full - 1 - 20 1 20 channel on leakage current a i d(on) v + = 3.3 v, v en = 0 v v s = 3 or 0.3 v, v d = 0.3 or 3 v room full - 2 - 10 2 10 digital control logic high input voltage v inh full 2 v logic low input voltage v inl full 0.4 input current a i in v ax = v en = 2 v or 0.4 v full - 1 1 a dynamic characteristics transition time t trans v + = 2.7 v, v no/nc = 1.5 v/0 v, 0 v/1.5 v r l = 300 ? , c l = 35 pf room 80 ns break-before-make time t bbm v + = 2.7 v, v x,y, z = 1.5 v, v s = 0 v, r l = 300 ? , c l = 35 pf room full 5 25 enable turn-on time t on(en ) room 90 enable turn-off time t off(en ) room 30 charge injection e q c l = 1 nf, v gen = 0 v, r gen = 0 ? room 9 pc off-isolation e,h oirr f = 1 mhz, r l = 50 ? room - 78 db crosstalk e x ta l k room - 83 source off capacitance e c s(off) f = 1 mhz, v s = 0 v, v en = 1.8 v room 5 pf drain off capacitance e c d(off) f = 1 mhz, v d = 0 v, v en = 1.8 v room 10 drain on capacitance e c d(on) f = 1 mhz, v d = 0 v, v en = 0 v room 15 power supply power supply current i+ v en = v a = 0 v or v + room 1 a
document number: 73410 s11-1066-rev. b, 30-may-11 www.vishay.com 7 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) r on vs. v com and supply voltage r on vs. analog voltage and temperature leakage current vs. analog voltage 0 40 80 120 160 200 04812 v com - analog voltage (v) v+ = 4.5 v t = 25 c i s = 1 ma v+ = 12 v v+ = 2.7 v - r on 0 20 40 60 80 - 5- 3- 1 1 3 5 v com - analog voltage (v) c b a a = 85 c b = 25 c c = - 40 c - r on - 40 - 30 - 20 - 10 0 10 20 30 40 - 5 - 4 - 3 - 2 - 1 0 1 2 3 4 5 v com , v no , v nc - analog voltage (v) leakage current (pa) v+ = 5 v v cc = 5 v t a = 25 c i d(off) i d(on) i s(off) r on vs. analog voltage and temperature supply current vs. temperature leakage current vs. analog voltage 0 50 100 150 200 024681012 v com - analog voltage (v) v+ = 2.7 v a = 85 c b = 25 c c = - 40 c a b c a b c a b c v+ = 4.5 v v+ = 12 v i s = 1 ma - r on 1 temperature (c) 10 000 100 - 40 - 20 0 20 40 60 80 100 supply current (pa) v en = 0 v v+ = 5 v v- = - 5 v v+ = 12 v i d(on) - 80 - 60 - 40 - 20 0 20 40 60 80 0246810 v com ,v no ,v nc - analog voltage (v) leakage current (pa) v cc = + 12 v t a = 25 c i s(off) i d(off) 12
www.vishay.com 8 document number: 73410 s11-1066-rev. b, 30-may-11 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) leakage current vs. temperature insertion loss, off-isolation crosstalk vs. frequency - 40 - 20 0 20 40 60 80 100 1 1000 10 000 temperature (c) 10 100 leakage current (pa) i no(off) , ii nc(off) i s(off) i d(on) i d(off) v+ = 5 v v- = - 5 v - 120 - 100 - 80 - 60 - 40 - 20 0 100k 1m 100m 1g frequency (hz) 10m (db) loss, oirr, x talk oirr crosstalk insertion loss v+ = 6 v v- = - 6 v r l 10k switching threshold vs. supply voltage charge injection vs. analog voltage 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0246 8 10 12 14 v + - s u pply v oltage ( v ) ) v ( d l o h s e r h t g n i h c t i w s - v t - 50 - 40 - 30 - 20 - 10 0 10 20 30 40 50 024681012 q - charge injection (pc) v com - analog voltage (v) v+ = 2.7 v v+ = 4.5 v v+ = 6 v v+ = 12 v 14 supply current vs. input switching frequency input switching frequency (hz) 1k 10k 100k 100 i+ - supply current (na) 10 m 1m 10m 10 1 m 100 10 1 100 n 10 n 1 n v+ = 12 v v- = 0 v
document number: 73410 s11-1066-rev. b, 30-may-11 www.vishay.com 9 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test circuits figure 1. transition time a 1 a 0 a 2 a 1 a 0 v- v+ v- gnd d 35 pf v o s 1 s 2 - s 7 s 8 50 300 v s8 v s1 v+ v- v+ v- gnd 35 pf v o s 1b s 1a - s 4a , d a s 4b 300 d b logic input switch output v s8 v o t trans t r < 5 ns t f < 5 ns s 8 on (dg9408) or s 4 on (dg9409) s 1 on t trans 50 % v s1 50 % 90 % 90 % 3 v 0 v dg9051 dg9052 v s4b v s1b v ax 50 v+ en en return to specifications: single supply 12 v dual supply v+ = 5 v, v- = - 5 v single supply 5 v single supply 3 v figure 2. enable switching time logic input switch output v o t r < 5 ns t f < 5 ns 3 v 0 v 0 v t on(en ) t off(en ) 50 % 90 % 90 % v o s 1 s 2 - s 8 a 0 a 1 a 2 50 300 v o v+ gnd v- d 35 pf v- v+ s 1b s 1a - s 4a , d a s 2b - s 4b d b a 0 a 1 50 300 v o v+ gnd v- 35 pf v- dg9051 dg9052 v s1 v+ v s1 en en return to specifications: single supply 12 v dual supply v+ = 5 v, v- = - 5 v single supply 5 v single supply 3 v
www.vishay.com 10 document number: 73410 s11-1066-rev. b, 30-may-11 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test circuits figure 3. break-before-make interval 50 % 90 % logic input switch output v o v s t open t r < 5 ns t f < 5 ns 0 v 3 v 0 v v+ gnd v- 35 pf v- a 2 d b , d all s and d a 300 v o 50 a 1 a 0 v s1 en return to specifications: single supply 12 v dual supply v+ = 5 v, v- = - 5 v single supply 5 v single supply 3 v figure 4. charge injection a 0 a 1 a 2 v o v+ gnd v- d v g r g s x c l 1 nf channel select 3 v 0 v off on logic input switch output v o v o is the measured voltage due to charge transfer error q, when the channel turns off. q = c l x v o off v+ v- en figure 5. off isolation r l 50 v out v+ gnd v- a 2 d a 1 a 0 s 8 s x r g = 50 off isolation = 20 log v out v in v in v+ v- en figure 6. crosstalk r l 50 v out v+ gnd v- a 2 d a 1 a 0 s 8 s x r g = 50 crosstalk = 20 log v out v in v in s 1 v+ v- en r in 50
document number: 73410 s11-1066-rev. b, 30-may-11 www.vishay.com 11 vishay siliconix dg9051, dg9052, dg9053 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test circuits vishay siliconix maintains worldwide manufacturing capability. pr oducts may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?73410 . figure 7. insertion loss r l 50 a 2 v out d r g = 50 insertion loss = 20 log v out a 1 v in a 0 v in s 1 v+ gnd v- v- v+ en figure 8. source drain capacitance f = 1 mhz s 1 d gnd v+ v- meter hp4192a impedance analyzer or equivalent s 8 a 1 a 2 a 0 channel select v- v+ en
vishay siliconix package information document number: 74417 23-oct-06 www.vishay.com 1 symbols dimensions in millimeters min nom max a - 1.10 1.20 a1 0.05 0.10 0.15 a2 - 1.00 1.05 b 0.22 0.28 0.38 c - 0.127 - d 4.90 5.00 5.10 e 6.10 6.40 6.70 e1 4.30 4.40 4.50 e-0.65- l 0.50 0.60 0.70 l1 0.90 1.00 1.10 y--0.10 1036 ecn: s-61920-rev. d, 23-oct-06 dwg: 5624 tssop: 16-lead
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of DG9051-11

	To Download DG9051-11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .